How to Measure a Conveyor Belt
Learn some of the common terms and basic technique for measuring a conveyor belt.
Learn some of the common terms and basic technique for measuring a conveyor belt.
Knowing how to properly measure a belt is critical. It's also important to note which type of measurement you take. Here are some common measurements:
- Inside Circumference
- Outside Circumference
- Board Length
Understanding these measurement types and how to obtain them will ensure that we provide an accurate replacement belt. Watch this short video to learn more.
Once you know your belt requirements, just email moc.gnitleblom@selas to get your quote fast!
Many belts can be measured while they are still on the conveyor. Follow the steps below:
Step 1:
Find a flat section of the conveyor that is accessible.
Step 2:
Mark a starting point on the belt that you can easily recognize later.
Step 3:
Mark at regular intervals along the edge of the belt until you get back to the starting point.
Step 4:
Add each length interval to the total as you go.
Step 5:
The final measurement to the starting point is your belt's Board Length (see tips for additional measurements).
In case you happen to remove your belt before you measure, no worries! There is a simple way to measure your belt. First, lay the belt completely flat and then take a tape measure and measure from end to end. If you have a laced belt, the process is the same except you measure from the end of the lacing on one side to the end of the belt material on the opposite end.
Please contact your Mol Belting sales representative with any questions!